Thursday, January 15, 2009

moving buildings

DCMUD has a story about moving an historic building to make room for the large St. Martins low income housing project

1 comment:

Yasirali said...

Sometimes, moving is something that is necessary. Everything has to be packed up in order to be taken to the new destination. It all has to be loaded in a moving vehicle of some sort only to be unpacked when it reaches the new location. After everything is taken out of the building, you look back at it with sadness because of the fond memories you have, but that is something you must leave behind. Well, you're at least leaving the neighborhood behind.

You stand there watching how these guys are putting the building on the back of an 18 wheeler and you can't wait until it is delivered to the new location that your company acquired. There is more land and more steel buildings to be delivered to the location. Not too many people can move to a location that is ten miles away from them and actually take the building with them.

Depending on the size of the steel building, it can be moved in pieces and put together at its final destination. Sometimes a steel building may be like a storage container that is used as an office. Whatever the reason, there is a process to moving a steel building. It may seem like a mystery to some as to how it is possible to move something so large and so heavy, but the process is rather easy at times.

It doesn't matter if the building is new and just being built or is an existing structure that needs to be moved, it has to be divided up into pieces. When it is a new building, the pieces are built, shipped to the building's destination, and then assembled there. If the building is an existing structure, then it will be divided into the same pieces it was in when it arrived brand new. After this occurs, the following steps take place:

• The pieces are lifted by a building jack apparatus. The buildings are usually built with slots in which the building jack apparatus can be inserted.

• The jack then lifts the building up to a predetermined height, but instead of it being lifted onto the truck, the truck backs up under the lifted building. The jack then lowers the building onto the bed of the trailer.

• When the building meets its destination, the same method can be used to lift the building off of the trailer bed or the trailer bed may be hydraulic and can carefully slide the building off of the back of it. This step depends on whether or not that piece of the building can stand on its own. This process is repeated for all of the pieces. Depending on the size of the building, it can take several trucks to move the building.

http://www.wolfehousebuildingmovers.com/